Product Details:
Minimum Order Quantity | 1 Number |
Capacity | 5Ton |
Usage/Application | Paper Corrugation |
Speed | 40mtrs |
Hydraulic Reel Stand Hp | 2hp |
Automation Grade | Semi-Automatic |
Output Paper Width | 1400-1800mm |
Voltage | 440v |
52 “DOUBLE PROFILE HIGH SPEED BEARING MOUNTED SINGLE FACE PAPER CORRUGATED MACHINE
v Machine was Fitted with Narrow & Broad flute rolls
v Roll Material :- EN – 9 (Forged)
v S.Steel Tube heaters ½” Thickness of 11 K.W Each.
v Pre-Heater: 2 Nos. (3 K.W. Each)
v Motor of 7.5 H.P (Crompton Make)
v Motor of 2 H.P X 2 Sets for Flute Change Mechanism, , S.S.Gum Tray
v Rewinding arrangement with 2 No’s rewinding Shafts, Tool Box.
v Hydraulic Lifting Reel Stand With, 2 unwinding Shafts # 2 H.P.
motor # Capacity of lifting 1000 Kg loads.
v Rolls Diameter: 230 MM
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Automation Grade | Semi-Automatic |
Usage/Application | Box Making Machine |
Packaging Type | Paper and Wooden |
Size | 1200 - 2000 |
Material | High Tougson Carpide |
Automatic Grade | Semi-Automatic |
Voltage | 440 |
Power | 10Hp |
Capacity | 6tons |
Driven Type | Ac |
Speed | 80 meter |
Weight | 4000 |
Heating Load | 12 Kw |
I Deal In | New and Second Hand |
Maximum Weight | 4000 kgs |
Maximum Roll Diameter | 350 mm |
Design Speed | 60m per min |
Effective Width | 1400 mm |
Corrugated Roller | 280 mm |
1 | 100000 |
Our SF-320S (360S) fingerless single facer, also used for making single face corrugated boards, comes with higher machine speed. The working speed range is 0-150m/min. The top and bottom corrugating rolls are made of high quality 52CrMo alloy steel.
The high speed single facer also plays significant role in single face corrugated board production line and automatic 3/5/7 ply corrugated board production line. The optional flute patterns are available in A, B, C, E and F. There are various heating methods available, namely electric heating, steam heating, oil heating, etc.
Main Features of SF-320S (360S) Fingerless Single Facer
1. The reduction gearbox enjoys oil immersed lubrication, thus producing low noise. Cardan drive can make power source separated.
2. Up and down movements of top corrugating roll, pressure roll and adhesive roll are controlled pneumatically.
3. Vacuum absorption type cardboard guide roll with air flow adjustment device will assure that the corrugated flute pattern can keep stable at high speed.
4. The bearings of corrugating roll and pressure roll are lubricated by high temperature resistant grease.
5. This type of fingerless single facer comes with a high performance gluing unit that provides automatic and circulatory gluing capability.
6. The top and bottom corrugating rolls are made of superior 52CrMo alloy steel, experiencing thermal treatment and surface grinding process. Hardness reaches HRC58-60.
7. The glue roll has been carved with reticulate pattern and plated with hard chrome.
8. Manual or motorized glue adjusting device is specially designed for matching glue width with the paper width.
9. The gluing unit of this fingerless single facer can run independently or not when machine stops.
Specifications of SF-320S (360S) Fingerless Single Facer
1. Maximum machine speed (320S): 120m/min
2. Maximum machine speed (360S): 150m/min
3. Effective width: 1400mm-2500mm
4. Corrugating roll size: 320mm or 360mm
Description:
Drive reducer box, oil immersed type lubricating to reduce noise keep running stable adopt transmission separate power.Corrugating roller pressure roller and glue roller by pneumatic adjustmentBearing of corrugated and pressure roller adopt high temperature lubricate greaseGlue parts auto supply glue circularly.The upper-lower corrugating roller are made of 52CrMo high quality alloy steel after heat treatment. The hardness HRC58-60the surface is been grinned.The glue part surface are treated by special mesh and chrome plated.
Manual glue width dividing to match the paper width.
The structure is double rolls with four arms mill rolls on both arms can be bearing at the same time.Hydraulic control of lifting, lowering, clamping and centering.Wev tension is controlled by pneumatic or magnetic power tension control, expendable chucks is optional.
Additional Information: